Which of the following elements is not used in an automatic control system?

Which of the following elements is not used in an automatic control system?

In an automatic control system which of the following elements is not used? Explanation: In an automatic control system oscillator is not used because the oscillator increases the oscillations but our aim is to reduce the oscillations and hence oscillator is not used.

Which elements is used in an automatic control system?

Feedback controls are widely used in modern automated systems. A feedback control system consists of five basic components: (1) input, (2) process being controlled, (3) output, (4) sensing elements, and (5) controller and actuating devices.

What are the 3 elements of control system?

Abstract. The constitution of a closed-loop control system is discussed in chapter 1; the basic system is defined in terms of three elements, the error detector, the controller and the output element.

What is an automatic control system?

Automatic Control System means a system that utilizes programming logic to automate the operation of the instrumentation and systems so as to produce the operational results.

Which of the following is not an element of control?

none (all are elements of control).

Which of the following is not a feature of a good control system?

1. Which of the following is not the feature of modern control system? Explanation: For a good control system the speed of response and stability must be high and for the slow and sluggish response is not used and undesirable.

What are the four types of automatic controls?

What are the types of Automatic Controls? Electrical, Mechanical, Electromechanical and Electronic. Operated and normally control electrical devices.

What are the basic elements of control?

There are four basic elements of a typical motion control system. These are the controller, amplifier, actuator, and feedback. The complexity of each of these elements will vary depending on the types of applications for which they are designed and built.

What are the types of automatic controls?

Automatic control systems can be classified into four main types:

  • Two-position controllers (ON/OFF).
  • Proportional controllers.
  • Integral controllers.

Which is not one of the three elements of control?

Answer and Explanation: The correct answer is b. Dominating the decision making of the investee.

What are the 5 basic elements of a control system?

A feedback control system consists of five basic components: (1) input, (2) process being controlled, (3) output, (4) sensing elements, and (5) controller and actuating devices.

Which of the following is not a step in process of controlling?

Integration of employees’ efforts is not a part of the controlling process.

What is an example of automatic control?

Examples of control systems in your day-to-day life include an air conditioner, a refrigerator, an air conditioner, a bathroom toilet tank, an automatic iron, and many processes within a car – such as cruise control.

Where are control systems used?

Control Systems are used in domestic applications, general industry, military and virtually every modern vehicle in the world. Control Systems are very common in SCADA and Industrial Automation systems. Control Systems are used in Industrial Automation to regulate how devices operate in real time.

Which of the following is not an element element?

Which of the following is not an element? (1) Graphite (2) germanium (3) silica (4) silicon. Graphite is a carbon element. Silicon(Si) and germanium(Ge) are also elements, but silica (SiO2) is not an element.

Which one of the following is not function of management control system?

Management is defined as the procedure of organising, directing, planning and controlling the efforts of organisational members and of managing organisational sources to accomplish particular goals. Therefore, co-operating is not a function of management. Hence, the correct answer is option (c).

Which of the following is not a element of planning?

Ans 1) Among the options mentioned in the question, planning is not an element of directing. Planning means a process of deciding the actions/ activities to be undertaken and how they are to be done.

Add a Comment

Your email address will not be published. Required fields are marked *